A forged part is only as good as its verification. Aluminum forging quality inspection combines dimensional, metallurgical, and non-destructive checks to prove a part meets spec. This guide walks through what a qualified supplier should do.
Dimensional Inspection
After CNC finishing, critical dimensions are checked on a CMM against the drawing. Tolerances are agreed up front—see our tolerances guide for typical ranges.
Mechanical Testing
Representative samples undergo tensile and hardness tests to confirm the alloy and heat-treatment state deliver the required strength. Batches are traced so any deviation is contained.
Non-Destructive Testing (NDT)
For safety parts, penetrant or ultrasonic testing reveals surface and sub-surface flaws that visual checks miss. Our aerospace forging experience relies heavily on NDT discipline.
Surface and Finish Check
Anodizing, coating, or polishing is inspected for coverage, thickness, and adhesion so corrosion protection holds in service.
Documentation
A mature supplier issues inspection reports and material certificates per batch, supporting traceability for regulated industries.
About Guangdong XinPingFu: Based in Shenzhen, China, Guangdong XinPingFu provides forged aluminum parts with CMM, mechanical, and NDT inspection under ISO9001, holding a 99.7% qualified rate. Contact us to define the inspection plan your application requires.
